You May Not Have Cleaned Your Wireless Earphones at all, That’s Not Good!

You May Not Have Cleaned Your Wireless Earphones at all, That’s Not Good!

So, a summary of how to care for wireless earphones from each company

Try to smell the wireless earphones. You might want to clean it now.

Wireless earphones that are no longer part of your ears. It’s probably the one who sticks into the ear canal for hours every day and touches the skin more than anyone else. I clean my ears every day, but I don’t think I clean my earphones very much … I think there are surprisingly many people. Me too.

Obviously, regular cleaning is hygienic and can make your earphones last longer. This time, we will introduce the world’s major earphones … How to care for AirPods, Galaxy Buds, and Pixel Buds officially released by Apple, Samsung, and Google respectively. If you have other wireless earphones, you can clean them in the same way.

How To Care For Your AirPods

The first thing to keep in mind when cleaning Apple’s official AirPods (AirPods Pro, AirPods Max, EarPods) is not to rinse them with water.

However, it is OK to lightly moisten the cloth with water. After gently wiping it off with the cloth, wipe it with a soft, dry cloth that does not generate lint, such as a cleaning cloth, and dry it, and no moisture will remain. Make sure it is completely dry before returning it to the charging case. Clean the mesh of the microphone and speaker with a dry cotton swab.

Disinfectants are also available, but be sure to gently wipe the outer surface with a 70% isopropyl alcohol wipe, a 75% ethyl alcohol wipe, or a Clorox Disinfecting Wipes. Again, be careful not to let moisture or moisture get in.

Telework-specific headphones that reduce the stress of video conferencing Sponsored by Cisco Systems GK

Eartips can be removed from your AirPods and rinsed with water, but avoid using soap or detergent. Then make sure the ear tips are completely dry and then reattach them to your AirPods.

Similarly, clean your AirPods charging case with a soft, lint-free, dry cloth. If necessary, you can slightly moisten the cloth with isopropyl alcohol, but be careful not to let the liquid get into the charging port. Also, if the Lightning connector is clogged with dirt or dust, use a clean, dry brush to remove it.

How To Care For Galaxy Buds

A guide is available that describes how to care for Samsung earphone products, including the Galaxy Buds.

As with AirPods, if moisture such as sweat adheres to the charging contact part of the earphone, wipe it off with a clean and soft cloth. Be aware that if water collects on the charging contacts, it may cause corrosion.

There are different types of Galaxy Buds, but the care is basically the same. First of all, slide the ear tip slowly and gently to remove it. For Galaxy Buds Live, remove the wingtip (the small rubber band on the charging contacts).

Then use a cotton swab or a dry brush to carefully remove dirt (dust, earwax, oil, etc.) from the earphones and ear tips (or wingtips). Avoid using metal or wire brushes as they can damage your earphones. If your earphones have an air duct, clean the air duct as well.

Gently and gently wipe the inside of the earphone tip with a soft, dry cloth. Don’t forget to clean the charging contacts of the charging case. Replace the Galaxy Buds ear tips when they are clean.

How To Care For Your Pixel Buds

The official way to care for your Pixels Buds (or Pixel Buds A) is also available with a video. Although the Pixel Buds are resistant to sweat, never try to flush or submerge your earphones in running water as they can damage your hardware. Also, be careful not to use chemical detergents, powders, or other chemicals (such as alcohol or benzene).

Like other manufacturers, Google recommends using a lint-free, soft, dry cloth for cleaning. If necessary, you can use a damp cloth or cotton swab to wipe off any scratches or accumulated dirt on the outer surface of the charging case, but do not allow water to get into the gaps such as the USB-C port. It is recommended to use a soft bristle toothbrush to clean the earphones. Gently insert the toothbrush bristles into the microphone holes and speaker openings and move the toothbrush back and forth to remove dirt such as earwax. Care for the toothbrush by pulling it out so that it does not move from side to side, as earwax may spread or stain. Then make sure all parts are completely dry before putting them back in the charging case.

It is recommended that earphones from all manufacturers should never get wet and should be cleaned gently and gently with a soft, dry cloth that does not generate lint, such as a cleaning cloth.

Be sure to clean your earphones before you forget.

Also Read : Here Come The Beats Studio Buds, Noise-Canceling Headphones Of Android

Leave a Reply

Your email address will not be published. Required fields are marked *